| Parameter | Specification |
| Model | GY-SVG-5k/2L |
| Type | Single-Phase Static Var Generator (SVG / STATCOM) |
| Rated Capacity | 5 kvar |
| Operating Voltage | AC 220 V (-20% ~ +20%) |
| Grid Configuration | Single-phase, L / N (1P2W) |
| Operating Frequency | 50 / 60 Hz (45 ~ 63 Hz auto-sensing) |
| Switching Frequency | 16 kHz |
| Control Core | DSP (TI 28335) + CPLD full-digital, three-level topology |
| Reactive Compensation Rate | ≥ 99% (inductive & capacitive) |
| Target Power Factor | ≥ 0.99 (adjustable) |
| Transient Response | < 50 µs |
| Full Response Time | < 10 ms |
| Overall Efficiency | ≥ 97% |
| Overload Capability | 1.2× rated for 60 seconds |
| Parallel Units | Unlimited (same feeder) |
| Function Selection | Reactive power compensation (single-phase) |
| Communication | 2× RS485 (Wi-Fi supported) |
| Noise Level | ≤ 60 dB |
| Protection Functions | Overload, software / hardware over-current, grid over-/under-voltage, power-supply failure, over-temperature, frequency anomaly, short-circuit protection |
| Installation | Rack-mounted / Wall-mounted |
| Cable Entry | Rear entry (rack) / Top entry (wall-mount) |
| Protection Rating | IP20 (IP54 customizable) |
| Cooling | Forced air cooling, independent air duct design |
| Ambient Temperature | -10 °C ~ +50 °C (capacity derating ≤ 30% above 40 °C) |
| Relative Humidity | ≤ 90%, no condensation at monthly minimum 25 °C |
| Altitude | < 2000 m (derate per GB/T 3859.2 above 2000 m) |
| Pollution Degree | Class III |
